Table of Contents
Advertisement
Phoning
Call Waiting Calls
Note:
You can also use this function on analogue phones, where it can be
performed via the T-Net function key/menu (optional, see manual for the
phone).
On ISDN and system phones, this function is performed via an existing
function key or via the menu (optional, see manual for the phone).
Accepting the Call Waiting Call
If you receive another call while you are already making a call and you want
to speak to the second caller, or you want to end the current call, you can
accept the call waiting call. After accepting, you are connected with the other
caller. Your previous communication partner hears the hold music.
If a call waiting call is signaled, proceed as follows:
1. Press the Flash key or the Query key.
2. Dial 2.
You are connected with the caller. Your previous communication partner
hears the hold music.
Note:
You can also use this function on analogue phones, where it can be
performed via the T-Net function key/menu (optional, see manual for the
phone).
238
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
