Short Reference
PIN
PIN
Changing the PIN (on an Internal Phone)
* 99 *
PIN
*
1st PIN
2nd PIN
3rd PIN
Note: If, at the end, you hear a busy signal instead of a confirmation
tone, the new PIN may already be in use in the PBX and no change
takes place. Re-attempt with another digit sequence.
330
PIN
*
PIN
Old PIN to be changed = Admin, sub-admin, user or
externa PIN
New PIN = Admin, sub-admin, user or externa PIN
New PIN = Admin, sub-admin, user or externa PIN
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
#