Ending A Query Call; Toggling Between Conversations - Auerswald COMmander 6000 Advanced Information

Ending a Query Call

If you make a query call and the number is busy but there is no response,
proceed as described in one of the following steps.
• The subscriber called for the query call does not respond: Press the
Flash key or the Query key and dial 1.
You are now reconnected with the person waiting on the other line.
• The subscriber called for the query call is busy. Wait.
You will automatically be reconnected with the communication partner
waiting on the other line.
Note: On ISDN and system phones, this function is performed via a
function key or via the menu (optional, see manual for the phone).

Toggling between Conversations

You can toggle between your two communication partners.
During a query call, proceed as follows:
1. Press the Flash key or the Query key.
2. Dial 2.
You continue to conduct a query call. The other communication partner
is now active.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Phoning
Query Calls
267