Table of Contents
Advertisement
Settings – Subscriber (scr.)
Phone numbers
New
Adds a new subscriber. You must then make the settings for this new
subscriber.
Notes:
After selecting the VoIP device types COMfortel IP and Standard VoIP
phone you can already assign the MAC address and a provisioning file
to the subscriber (you can configure the provisioning file using the page
Subscriber (scr.) > IP provisioning > File management).
For the new subscriber PINs and passwords will be automatically
generated (you can change them using the page Subscriber (scr.) >
Properties). The following passwords must be adapted:
The device type Handset on COMfortel IP1040 needs exactly eight
characters (digits and/or characters - no special characters!).
The device type Handset on COMfortel WS-IP needs up to 32
characters (digits and/or characters - no special characters!).
558
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
