Auerswald COMmander 6000 Advanced Information page 55

Functions, Uses, Concepts
DECT Phones
operated as IP DECT phones. The chapter Settings - Subscriber (scr.) >
COMfortel DECT describes how you can create internal numbers for these
mobile handsets.
The Setup Guide (only available in German) of the basestation describes
how you can log a COMfortel DECT 900/900C on to the basestation.
The chapter Settings - Subscriber (scr.) > COMfortel DECT describes how
you can take over phone book entries for the COMfortel DECT 900/900C
Handsets.
COMfortel WS-400 IP or COMfortel WS-650 IP with COMfortel M-100/
200/210/300/310
The IP DECT server is connected to and operated on the PBX via the
Ethernet port and internal VoIP channels (optional, see Technical Data in the
Instructions).
In connection with a COMfortel WS-400 IP or COMfortel WS-650 IP, the
handsets are operated on the PBX as IP DECT phones. The chapter
Settings - Subscriber (scr.) > COMfortel DECT describes how you can
create internal numbers for these mobile handsets.
The Setup Guide of the IP DECT server describes how you can log a
handset on to the IP DECT server.
The chapter Settings - User data > Address books describes how you can
take over phone book entries for the handsets.
55
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018