Table of Contents
Advertisement
Settings – Public switched tel. networks
ISDN connections
An activation of the layer 1 is requested from the PBX as soon as the
layer is put into the idle state by the network provider. Thus, for example, a
delay time is avoided before the external dial tone indicates its action
readiness.
Language delay at setup ack with inband info
Interfering noise during dialling phase are avoided.
Always send DTMF digit after inband info
Note: This is a country-specific setting (only relevant in Italy).
All outstanding digits are transferred via DTMF.
No T310 for Info boxes
Note: This is a country-specific setting (only relevant in Italy).
T310 is a timer for ISDN that disconnects a call connection after a certain
time.
The call is not disconnected after a certain time.
440
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
