Calling a Door and Opening the Door
The PBX supports the connection and control of various types of door
terminals. In addition to a door bell, ringing at the door can in this way also
be indicated by internal or external phones or groups. Each door bell button
can be assigned an individual destination number. You can also carry out
various door functions such as speech connection with the door and
actuation of the door opener from internal phones.
Proceed as follows:
•
Using an internal phone
•
Using the menu/function key on a system phone (optional, see the
phone manual)
Requirements:
•
Configured door terminal
•
Configured relay with operating mode Door opener
•
Authorisation Open door assigned to subscriber or group
1. Pick up the receiver.
Note: During a call, press the Flash key or the Query key.
2. Enter the internal number of the door terminal. Possible entries:
Internal number of the door terminal
Direct exchange line phone: with preceding **)
The call connection is immediately established after dialling the phone
number.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
(for exchange line request type
Phoning
Outgoing Calls
251