Table of Contents
Advertisement
The default exchange line access number on the PBX is 0 in the factory
settings. However, this can be changed. Note that changing the
exchange line access number restricts the phone numbering plan.
Name
Freely selectable name. This name is used to identify the announcement
output within the PBX and the connected system phones. The name can
also be transferred to the VoIP end devices via LDAP server.
Module
Port
Module and port to which the device that can be used as announcement
output (e. g. an a/b-Audiobox at a loudspeaker system) is connected.
Configure
Opens the configuration of the announcement output.
Relay
Requirements:
•
Relay/actuator (optional, see chapter Technical Data in the Instructions)
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Devices
Announcement Outputs
755
Advertisement
Table of Contents
