Auerswald COMmander 6000 Advanced Information page 426

Pbx for internet/isdn telephony
Hide thumbs Also See for COMmander 6000:
Table of Contents

Advertisement

Settings – Public switched tel. networks
Exchange line request
The digits in the table below are the common LCR number prefixes in
Germany. For other countries, more LCR number prefixes (a total of 10) can
be entered.
Digit number
5
6
SIGNALLING TONES
Dial tone
Ringer
Busy tone
Depending on the location of the PBX, the signalling tones are correspond-
ingly preconfigured but they can also be changed. For these tones, only the
frequencies 400, 425, 440 and 450 Hz are possible. Tones differing from
these frequencies are rounded to the nearest frequency.
Note: Do not change the preconfigured values for dial tone, ringer and
busy tone unless you are told to do so by our support staff.
426
Digits begin with
010
0100
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Advertisement

Table of Contents
loading

This manual is also suitable for:

Commander 6000r

Table of Contents