Settings Call Distribution - Auerswald COMmander 6000 Advanced Information

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

Settings Call Distribution

Proceed as follows:

Separately for configurations

Separately for external connections

Using the Configuration Manager (page Public switched tel. networks

> Call distribution)

CALL DISTRIBUTION FOR

The fallback function indicates how the PBX deals with calls which could not

be transferred or rejected via call distribution.

The caller will hear the busy signal.

Fallback settings: The caller will be transferred according to the settings.

Only Announcement before Answering: The caller hears the

Announcement before Answering and then, the connection is inter-

Fallback phone number and no Announcement before Answering: The

call will be ringing on the selected internal number.

Fallback phone number and Announcement before Answering:

– immediately

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Settings – Public switched tel. networks

Call Distribution

Commander 6000r