Table of Contents
Advertisement
Header Files
Header files do not contain configuration data but refer to one or more provi-
sioning files which contain configuration data. Header files contain a list of
URLs which are processed in order.Provisioning files can neither be
provided by the PBX or by an external server. A combination of both variants
is permitted. The header file is the file that the phone must read first. It can
contain references to sub files. Any files can be imported, however,
Auerswald/FONtevo IP phones only support *.xml files.
You will find further information about header files on the Internet (see
www.auerswald.de/service
Creating a New Provisioning File
Via the Configuration Manager of a COMfortel 1400IP/2600IP/3600IP you
can create a phone configuration and then select the configuration data
which are to be distributed to other phones.
Proceed as follows:
•
Using the Configuration Manager
Note: You will find the account IDs used in the PBX and for the exchange
lines in the file editor under Subscriber (scr.) > IP provisioning > File
management > Edit > Account IDs.
1. Open the Configuration Manager of the IP phone via its IP address.
2. Open the page Settings > Personal > Backup & reset.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
under Developer).
Functions, Uses, Concepts
Provisioning for IP Phones
151
Advertisement
Table of Contents
