Table of Contents
Advertisement
Settings – Devices
Action URLs
Alarm
In the first list feld, select one of the existing alarms, select the alarm type in
the second list field and click
If you do not want to use any of the existing alarms, select New alarm in the
list field (
cancels the operation). Enter the phone number of the alarm
and a freely selectable name. In the list field Alarm type, select the alarm
type. Click Ok.
Note: You can successively select all three alarm types for one Action
URL.
Phone number
This is an internal number. You can select any of the numbers in the internal
supply of phone numbers. This number can be called directly by an internal
subscriber to initiate an alarm. (Select
Notes:
A number cannot be allocated twice.
Using numbers with few digits (two- or three-digit numbers) inevitably
restricts the possible supply of numbers that require more digits. For
example, if the phone number 12 is assigned, the phone numbers 120
to 129 and 1200 to 1299 are no longer available.
788
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
.
New to enter.)
Advertisement
Table of Contents
