Table of Contents
Advertisement
the internal phone number. To avoid waiting time, you can subsequently
enter #. The PBX therefore recognises the input as finished and instantly
starts dialling.
In factory settings, the system-wide automatic exchange line request (for
all subscribers) is switched on. Alternatively, the exchange line request
type can be set separately for each subscriber. In this case, the
automatic exchange line request can only be selected for IP DECT
phones, COMfortel 1200 IP and COMfortel C-400. For all other
subscribers, only direct exchange line phone and internal phone can be
selected.
Proceed as follows for configuration:
•
Making settings for exchange line request.
– Using the Configuration Manager (page Public switched tel.
networks > Exchange line request)
•
Making settings for exchange line request separately for subscribers.
– Using the Configuration Manager (page Subscriber (scr.) >
Properties > Exchange line settings)
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Exchange Line Request
37
Advertisement
Table of Contents
