Table of Contents
Advertisement
Settings – Subscriber (scr.)
COMfortel DECT
Proceed as follows:
•
Using the Configuration Manager
Requirements:
•
COMfortel DECT 900 Base connected to the internal S
•
COMfortel DECT 900/900C Handsets
•
Configured internal numbers for the COMfortel DECT 900/900C
Handsets
1. Open the page Subscriber (scr.) > COMfortel DECT.
2. Select the DECT base in the list field under DECT base.
3. Select or clear the check box under Enable registration mode.
4. If you have enable the registration mode, click
registration mode.
The paging key on the COMfortel DECT 900 Base starts blinking.
Note: With older firmware versions of COMfortel DECT 900/900C
Handsets it might be necessary to put the handset close to the
COMfortel DECT 900 Base during registration.
586
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
port
0
Save to enable the
Advertisement
Table of Contents
