Connecting Both Conference Call Partners - Auerswald COMmander 6000 Advanced Information

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

Conference Calls

You then make a call with the communication partner who had previ-

ously been on hold in the background. The other subscriber of the

conference hears the hold music.

Important: To use this function on ISDN and system phones, the

function must be supported via a function key or via the menu by the

respective phone (optional, see manual for the phone).

Note: You also can use this function this function on analogue phones,

where it can be performed via the T-Net function key/menu (optional, see

manual for the phone).

Connecting Both Conference Call Partners

If you want to leave a conference call that you initiated yourself and your

conference call partners want to continue talking with each other, you can

connect both parties.

Requirements:

A conference call that you initiated yourself

To connect two external communication partners, the following is

required: Authorisation Transfer of external calls to external assigned

to the subscriber

During a conference call, proceed as follows:

1. Press the Flash key or the Query key.

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Commander 6000r