Outbound proxy
The outbound proxy is an intermediate server that processes all VoIP
requests and connections going to the provider (except for registration).
automatically
The PBX automatically determines an outbound proxy.
Manual Port
The outbound proxy is a fixed default setting. Enter this data as an IP
address or a URL.
Note: The Overviews > Ports page shows an overview of the PBX ports
(incoming and outgoing).
SIP port (1 to 65535)
The SIP port on the PBX is used both as an incoming port and an outgoing
port (i.e. for communications with the VoIP provider).
Notes:
A different SIP port must be used for each VoIP provider.
The SIP port for a VoIP provider cannot be the same as the SIP port of
the internal VoIP registrar or the SIPS port of the internal VoIP
registrar.
The Overviews > Ports page shows an overview of the PBX ports
(incoming and outgoing).
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Public switched tel. networks
Voice over IP (VoIP)
493