Table of Contents
Advertisement
Registration
The REGISTER request sent to the VoIP provider was successful.
The STUN request failed or the system has been rebooted. The area must
be rechecked to display the current status. A grey dot (undetermined status)
is displayed until a response is received.
Note: For some providers, STUN is disabled.
Error, e.g. because:
•
The registrar is offline.
Despite this, it can be possible to make outgoing calls if the steps in the
STUN request and Outbound proxy areas were successful. However,
since no phone number has been entered in the provider's registrar, no
calls can arrive over this account (the account is not accessible).
•
The domain has been set incorrectly for the VoIP provider in Public
switched tel. networks > Voice over IP (VoIP) > Provider >
Configure.
•
The account data has been entered incorrectly, e.g. due to a
misspelling, or the data has been assigned to the wrong provider. Here
you need to check the User name, the Password and the Authorisation
ID (if specified), in particular (Public switched tel. networks > Voice
over IP (VoIP) > Accounts > Configure).
•
The PBX was rebooted more quickly than specified in the time limit for
registration. Page Public switched tel. networks > Voice over IP
(VoIP) > Provider > Configure.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Configuration Manager
Monitoring
399
Advertisement
Table of Contents
