Table of Contents
Advertisement
Note: If the internal phone used for the query is the owner of the voice
mailbox, it is not necessary to enter a user PIN or remote access PIN.
3. Enter the user PIN or the
Remote access is started. You are led through the remote access menu
with the help of various announcements. Possible entries:
0 (Opens the Help menu.)
1 (Opens the main menu.)
2 (Plays back new messages.)
3 (Plays back all of the messages.)
4 Jumps back to the previous message.)
5 (Repeats the message currently being played back.)
F = 6 (Jumps to the next message.)
F = 7 (Deletes the message currently being played back.)
F = 8 (Ends playback.)
* 10 (Disables the voice mailbox.)
* 11 (Enables the voice mailbox.)
* 20 (Enables recording and changing announcements.)
Note: The default announcement and your own announcements, if any
have been recorded, will be played back. The following functions are
available while your own announcements are being played back:
# (Selects the currently heard announcement as active announcement.)
4 (Jumps to the previous announcement.)
5 (Repeats the announcement you have just heard.)
6 (Jumps to the next announcement.)
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
PIN for remote access
Functions, Uses, Concepts
Voice mail/Fax Boxes
and dial #.
201
Advertisement
Table of Contents
