Ip Black- And Whitelist; Settings Ip Black- And Whitelist - Auerswald COMmander 6000 Advanced Information

IP Black- and Whitelist

Topics
– Settings IP black- and whitelist (page 1019)

Settings IP black- and whitelist

Proceed as follows:
• Using the Configuration Manager (page (Seite Administration > IP
black- and whitelist)
BLOCKED LIST
Enable IP blacklist
If traffic from a particular IP address is evaluated as being too high - and
therefore probably malicious- this IP address is blocked. This means that
accesses from this IP address to the PBX are initially prevented for one
minute (single block by block time). The administrator is informed about the
block (Monitoring > Status report). During the block time the PBX
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Administration
IP Black- and Whitelist
1019