Unparking the Call (Call Parking)
Call parking lets a caller in a waiting position be transferred so that the
desired communication partner can accept the call on another internal
phone.
Requirements:
•
Authorisation Call Parking assigned to the subscriber
•
Parked call
1. Pick up the receiver.
Note: During an existing call press the Flash key or the Query key and
dial ##06.
2. Enter the internal base number. Possible entries:
Internal base number for the parking zone
type Direct exchange line phone: with preceding **)
3. Dial the number of the park position. Possible entries:
0
to
9
You are talking with the waiting caller.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
(for exchange line request
Phoning
Transferring
281