Table of Contents
Advertisement
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the
exchange line access number restricts the phone numbering plan.
Name
Freely selectable name. This name is used to identify the internal phone
number within the PBX.
Hold time (1..20 min.)
Specifies how many minutes a call is kept in the internal parking zone at
most. After the hold time has elapsed, the subscriber that put the call in the
parking zone is again signaled that the call is still there. If this subscriber is
busy, the call is put back on hold in the parking zone. If the hold time elapses
a second time without the call being transferred, the connection is discon-
nected and the caller hears the busy signal.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Functions
Call Parking
859
Advertisement
Table of Contents
