Table of Contents
Advertisement
GSM Gateway
A GSM gateway can be connected to an external port on the PBX. This
allows direct access to be configured on the world-wide GSM network
(Global System for Mobile Communications).
Note:
GSM gateways take external calls automatically. When this is done,
costs may be charged to the caller, even if nobody takes the call on the
internal destination side.
LCR ist not available for an external port connected to a GSM gateway.
If the PBX has no connection to the fixed network, outgoing external
calls can only be initiated via a targeted exchange line access using the
phone numbers (and the corresponding configured access) entered on
the page Routing > VoIP/GSM routing > Exception numbers or via a
configured preferred exchange line (Exchange line settings for
subscribers or groups).
Proceed as follows for configuration:
•
Switching GSM at the external connection on and entering the freely
selectable phone number.
– Using the Configuration Manager (on the following pages)
– Public switched tel. networks > ISDN connections > PTMP
connection
– Public switched tel. networks > ISDN connections > PBX base
numbers/trunk bundles > Configure
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
GSM Gateway
87
Advertisement
Table of Contents
