Table of Contents
Advertisement
Settings – Public switched tel. networks
ISDN connections
not supported by many providers.
Note: The setting CF facility has priority to the setting 2. B channel.
For call forwarding via the PBX, use any available call channel
Requirements:
•
Enabled call forwarding method 2. B channel
When an external phone number is forwarded, the call can be
forwarded via a call channel on any of the other ports.
A call can only be redirected via a call channel on the same port. The
probability that the call cannot be forwarded because the channels are busy
is therefore higher.
Renew call forwarding at PBX reboot
When rebooting the PBX, the saved data of the call forwarding is
renewed.
Important: In Switzerland, the configuration of a call forwarding is
chargeable. To avoid costs, the check box must be disabled.
444
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
