Table of Contents
Advertisement
•
Switching authorisation for switching of relays and alarms for the
involved internal phones on.
– Using the Configuration Manager (page Subscriber (scr.) >
Properties > Authorisations)
•
Switching relays.
– Using a character string on the internal or external phone (see
chapter Short Reference > Relays)
– Using the menu/function key on a system phone (optional, see the
phone manual)
Relay Operating Modes
Relays can have various functions on the PBX.
You can configure the following operation modes:
Speaking
The relay is assigned to a door terminal or an announcement output.
The PBX switches on the relay as soon as an audio connection has been
established between the PBX and the assigned device (e. g. an a/b-
Audiobox).
The PBX switches the relay off as soon as the audio connection is termi-
nated.
Possible use:
•
Switching an LED of the door terminal
•
Switching the loudspeaker area of the loudspeaker system for the
announcement output
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Relays (Actuators)
155
Advertisement
Table of Contents
