Table of Contents
Advertisement
Note: The corresponding subscribers in main and subordinate PBX
must have the same internal phone number.
•
Switching direct exchange line phone on for each subscriber.
– Using the Configuration Manager (page Subscriber (scr.) > Phone
numbers > Configure > Settings)
– Exchange line request : Direct exchange line phone
Note: If the PBs are to be linked via a STUN server, set STUN server
for the connection of external VoIP subscribers (page Adminis-
tration > VoIP configuration.
•
Make the following settings for the provider „Auerswald".
– Using the Configuration Manager (page Public switched tel.
networks > Voice over IP (VoIP) > Provider > Configure)
– Domain : IP address of main PBX
– Registrar : IP address of main PBX
– Sub-system operation:
– Format of called phone number : Send as dialled
– Format of own phone number : Without country code (e. g.
05306...)
– Number presentation type : In the display text
– Method of number presentation suppression : Anonymous
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Sub-System Operation
189
Advertisement
Table of Contents
