Table of Contents
Advertisement
Settings – Functions
Waiting Field
Automatic call take over
No automatic
Incoming calls must be put manually into the waiting field.
On busy
Incoming calls are automatically put into the waiting field if all waiting field
reception phones are busy. (In this case, "busy" means that there is an
ongoing call in the active waiting field receptions or an outgoing or incoming
call is ringing. If a caller is waiting in the waiting field, this does not count as
"busy".)
After 0..120 sec.
Incoming calls are indicated for a duration of x seconds in the waiting field
reception and then automatically put into the waiting field if not already
accepted manually.
Subscriber/group number for the Waiting Field
Select the group that is to be used as waiting field (alternatively single
waiting field reception).
871
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
