Auerswald COMmander 6000 Advanced Information page 624

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

Settings – Subscriber (scr.)

Properties / Function overview

Baby call (connection without dialling)

Requirements:

Subscriber is not a VoIP phone or VoIP system phone

After picking up the receiver, the phone number entered is automati-

cally dialled.

Billing factor

Indicates the value used to convert the subscriber's phone costs. This factor

is used to multiply the charges transmitted from the network provider or the

calculated charges. The phone costs calculated in this way are used in the

call data list.

Preliminary pick-up query and monitoring

Requirements:

VoIP end device which can evaluate the available information by BLF

VoIP phone from another manufacturer: SIP convenience package

enabled (optional, see chapter Functions, Uses, Concepts > Activation)

All information about the calls of the subscriber is available for evalu-

ation by BLF.

No phone numbers of the subscriber's calls will be transmitted by BLF.

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Destination number:

Commander 6000r