Table of Contents
Advertisement
Note: The character strings for the programming functions are listed in
this manual under "Configuring and Operating Functions".
7. Repeat step 4 to 6 to assign the function key with additional PBX
functions.
8. Click
Save.
9. Repeat step 2 to 6 to configure the function key for an additional mobile
handset.
Note:
The function key of a mobile handset can be copied into other mobile
handsets (Copy keys under Function keys).
The PBX begins to distribute the data to the mobile handsets in question.
If a mobile handset is currently not ready for the data transfer (disabled,
out of range or busy with a call), the PBX makes an attempt with the next
mobile handset after a few minutes until all of the data is distributed.
During the data transfer (duration: up to two minutes), the mobile
handset is not available and "Copying from PBX" is shown on the
display.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Subscriber (scr.)
COMfortel DECT
591
Advertisement
Table of Contents
