Max. duration of an external Call Through call (1..99 min.)
Specifies after how many minutes an external Call Through call is ended by
the PBX, due to security reasons.
Special exchange line settings Configure
You can make the following exchange line settings for internal subscribers,
but also for Call Through calls:
•
Exchange line authorisation
•
Call restrictor (outgoing)
•
Call deblocker (outgoing)
•
Preferred exchange line
•
Number presentation (outgoing)
•
Number presentation (incoming)
Call assignment
Call Through number
Requirements:
•
To use VoIP numbers: Standard (use of From header as screened
number) configured for the VoIP provider as evaluation type of
incoming SIP messages
– Using the Configuration Manager (page Public switched tel.
networks > Voice over IP (VoIP) > Provider > Configure
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Functions
Call Through
829