Table of Contents
Advertisement
Ringtones
The PBX supports different ringtones for signalling calls on the internal
subscribers. They can be used for example to differentiate internal calls,
external calls via different external numbers, door calls and alarm calls using
the ringtone.
Note:
Signalling is carried out by analogue devices as described (depending
on the end device used).
Some end devices (e.g., ISDN phones and wireless, analogue phones)
generate their own call tone/ringtone. For more information, refer to the
description of your end device.
On some system phones the ringtones can be configured based on the
call type or the phone numbers (optional, see phone manual).
Ringtones are displayed on analogue phones as follows:
1 x long: 1 long tone (1 second), 4 second pause, ...
3 x short: 3 double tones, approx. 1 second pause, ...
1st special tone: Uninterrupted pulsing
2nd special tone: Continually repeating double tones (3 double tones in
5 seconds)
3rd special tone: 1 double tone, approx. 4 second pause, ...
4th special tone: 2 short tones, approx. 4 second pause, ...
5th special tone: 2 long tones, approx. 3 second pause, ...
6th special tone: 1 short and 1 long tone, approx. 4 second pause, ...
Alarm: Uninterrupted pulsing
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Ringtones
111
Advertisement
Table of Contents
