Table of Contents
Advertisement
•
Switching configuration on.
– Using the Configuration Manager (page Time control > Configura-
tions)
– Using a character string on the internal or external phone (see
chapter Short Reference > Configuration Switchover)
– Using the menu/function key on a system phone (optional, see the
phone manual)
Proceed as follows for additional configuration of the automatic configu-
ration switchover:
•
Switching automatic configuration switchover on/off.
– Using the Configuration Manager (page Time control > Configura-
tions)
– Using a character string on the internal or external phone (see
chapter Short Reference > Relay)
– Using the menu/function key on a system phone (optional, see the
phone manual under Relay)
Note: Using a phone switch the system relay with operation mode
automatic configuration switchover and the Identification number 900
(factory settings).
•
Creating switching times for automatic configuration switchover.
– Using the Configuration Manager (page Time control > Switching
times)
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Configuration Switchover
117
Advertisement
Table of Contents
