Table of Contents
Advertisement
You can also use this function on analogue phones, where it can be
performed via the T-Net function key/menu (optional, see manual for the
phone).
On ISDN and system phones, this function is performed via an existing
function key or via the menu (optional, see manual for the phone).
A conference is not possible with a door terminal.
Initiating Toggling between Conversations during a Conference
Call
When you end a conference call and want to talk to each of the conference
call partners separately one after the other, you can specifically put one of
the conference call partners on hold in the background.
Requirements:
•
A conference call that you initiated yourself
During a conference call, proceed as follows:
•
Press the Flash key (when using a phone with DTMF dialling) or the
Query key (when using an ISDN phone) and dial 2.
You then make an individual call with the communication partner who
had previously been active. The other subscriber of the conference
hears the hold music.
•
Press the Flash key or the Query key and dial 1.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Phoning
Conference Calls
283
Advertisement
Table of Contents
