Settings – Functions
Music on Hold/Announcements
Import
The audio file (*.wav) stored on a (PC) data storage device is selected and
imported.
Notes:
The audio files (*.wav) must have the following properties: Format: 8-bit,
A-law, 8 kHz, mono and file name containing 32 characters.
In the Internet, you can convert the audio files into the audio format
required for the PBX (see www.auerswald.de/service). For example,
use the Audio Converter to convert audio files (*.mp3, *.wav or *.raw)
into G.711 (*.wav) audio format.
System files
The audio files already stored in the PBX for various different PBX functions
are displayed in this list. The Standard assignment column shows which
audio file is usually used for each function.
Listen
A suitable programme is used to open the audio file. The file is then either
played or saved to a (PC) data storage device.
874
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018