Table of Contents
Advertisement
Settings – Devices
Device Wizard
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the
exchange line access number restricts the phone numbering plan.
Relay X, Switch input X
Name
Enter the names of the relays and switch inputs.
Destination number,,
Select or enter the required call destination (external number, short-code
number, internal number of the individual phone, internal phone of the
group).
Note:
To create further configurations for a door terminal, open the page
Devices > Door terminals. The configuration is described in chapter
Functions > Door Functions.
To create further configurations for the announcement output, open the
page Devices > Announcement outputs. The configuration is
described in chapter Functions > Loudspeaker Announcement.
To create further configurations for the relays, open the page Devices >
Relays (actuators). The configuration is described in chapter Functions
> Relays (Actuators).
For using one or more switch inputs with alarm functions, open the page
Devices > Alarms. The configuration is described in chapter Functions
> Alarms.
730
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
