Settings Pbx Base Number/Bundle - Auerswald COMmander 6000 Advanced Information

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

Special encoding of the connected phone number

Standard: Must be selected in all countries except for Spain.

Spain: Must be selected in Spain.

Note: Depending on the provider, in Spain the special encoding

Standard might as well be selected.

FOR INCOMING CALLS

Waiting for direct dialling (4..8 sec)

Note: This is a country-specific setting (only relevant in Austria).

Enter a waiting time until the direct dialling (between 4 and 8 seconds). This

is useful when the phone number is first transferred incompletely.

Settings PBX Base Number/Bundle

Proceed as follows:

Using the Configuration Manager (page Public switched tel. networks

> ISDN connections > PBX base numbers/trunk bundle)

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Settings – Public switched tel. networks

ISDN connections

Commander 6000r