Table of Contents
Advertisement
Configuration Manager
Monitoring
- The spoken word of both ends of a telecommunication connection
- Configuration data of the PBX and connected phones, as well as the
corresponding PINs and passwords
Before any recording, all participants in the telecommunication
connection must be informed that these contents will be recorded and
must also be informed who will use the recorded data.
If you want to make the recorded data available to your specialised
dealer or to the manufacturer for error analysis, you must make sure that
the legal requirements are fulfilled.
Proceed as follows:
•
Using the Configuration Manager
Requirements:
•
Deenabled pop-up blocker in the browser or defined exception rule
1. Open the page
2. Accept the legal notes by entering
3. Click Start Trace.
Recording the network protocol is started.
4. If the error can be reproduced easily, try to repeat it now.
5. To stop the recording of the network protocol, click Stop Trace.
6. Save the file.
408
Monitoring > Network data stream.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
ok
in the entry field.
Advertisement
Table of Contents
