Table of Contents
Advertisement
Settings – Subscriber (scr.)
Properties / Function overview
Signalisation by tones
Internal dial tone
Specifies which tone the user hears after picking up the receiver or after
pressing the flash or query key if a line is available. It is then possible to dial
a phone number.
Note: See the Functions, Uses, Concepts > Tones section for infor-
mation about sound sequences.
Busy tone at end of call
The PBX generates a busy signal at the end of the call (e. g. the
communication partner hangs up).
For some answering machines, this busy signal does not interrupt a
recording. These answering machines cannot differentiate between the
busy signal and speech. For such cases, the busy signal can be disabled.
Note: See the Functions, Uses, Concepts > Tones section for infor-
mation about sound sequences.
628
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
