Table of Contents
Advertisement
Functions, Uses, Concepts
Subscribers
Subscribers
All connected end devices with telephony functions (phones, answering
machines, fax machines etc.) are set in the pbx as subscribers. To the
subscriber, a phone number and a series of properties are assigned.
Depending on the existing end devices there are analogue, ISDN and VoIP
subscribers.
Proceed as follows for configuration:
•
Creating a subscriber with an internal number.
– Using the Configuration Manager (page Subscriber (scr.) > Phone
numbers)
•
Assigning properties to the subscribers.
– Using the Configuration Manager (on the following pages)
– Subscriber (scr.) > Profiles > ...
– Subscriber (scr.) > Function overview
– Subscriber (scr.) > Properties
•
Configuring provisioning for IP phones.
– Using the Configuration Manager (on the following pages)
– Subscriber (scr.) > IP provisioning > Settings
– Subscriber (scr.) > IP provisioning > File management
•
Making common settings for all subscribers.
– Using the Configuration Manager (page Subscriber (scr.) > All
subscribers)
•
Assigning unassigned phones to a subscriber or deleting them.
– Using the Configuration Manager (page Subscriber (scr.) >
Unassigned phones)
180
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
