Table of Contents
Advertisement
Settings – Routing
Soft-LCR 4.0
Provider
no LCR
The dial attempt is initiated without a provider area code.
generate busy
The dial attempt is ended and a busy signal is issued.
Provider name: The dial attempt is initiated using the area code entered
under Routing > Soft-LCR 4.0 > Providers.
Note: During the dial attempt, if the selected provider under Main
provider is busy, the selected provider under 1st fallback provider is
attempted, etc. If still no connection is established during the dial with the
2nd fallback provider, a busy signal is issued.
Price per connection
Proceed as follows:
•
Separately for main provider, 1st and 2nd fallback provider.
Indicates the fee a provider charges for the establishment of a connection,
based on the currency entered in the PBX (page Functions > Call
allowance accounts).
Price per minute
Proceed as follows:
•
Separately for main provider, 1st and 2nd fallback provider
808
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
