Further steps:
•
The technical departments (Service, Development) use the file to
diagnose the malfunction.
Status messages
If errors occur in the PBX which can be resolved by intervention using the
Configuration Manager or in the hardware, these errors are listed in the
overview. Each error is explained in an error message. In most cases, a link
will be displayed on which you can click to go to the page where the error
can be corrected.
Note:
If an error occurs, the status messages appear directly after you log into
the Configuration Manager.
You can view the status messages in the Configuration Manager by
opening the Monitoring > Status messages page.
When you open the page it first shows the status, which is automatically
updated every 30 seconds.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Configuration Manager
Monitoring
409