Table of Contents
Advertisement
Area code without leading zero
Your own external phone number, that is to be transferred, is sent to the
VoIP provider with the local area code, but without a leading zero (e.g.
5306).
Notes:
The PBX checks whether any of the specified phone numbers are to be
transferred, and if so which ones (Subscriber (scr.) > Properties >
Exchange line settings).
The transmitted phone number is automatically converted into the
selected format. If prefixes are necessary for converting your own phone
number, the prefixes set for the account are used (Public switched tel.
networks > Voice over IP (VoIP) > Accounts > Configure).
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Public switched tel. networks
Voice over IP (VoIP)
509
Advertisement
Table of Contents
