Configuration Manager
Monitoring
Unknown analogue phone.
Connected analogue phone with date of last activity time.
Notes:
After connecting an analogue phone, the receiver must be picked up for
correctly displaying the phone status. The monitoring page should then
be updated.
The PBX cannot automatically recognize the removal of a device. It's
hardware status can be reset under Subscriber > Properties > Basic
Settings > Reset hardware status.
Status (ISDN phones)
Unkown ISDN phone.
Connected ISDN system phone.
402
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018