Call Distribution
Topics
–
Management Call Distribution (page 543)
–
Settings Call Distribution (page 547)
Management Call Distribution
Proceed as follows:
•
Separately for configurations
•
Separately for external connections
•
Using the Configuration Manager (page Public switched tel. networks
> Call distribution)
Note:
External numbers that are required as Call Through numbers
(Functions > Call Through) are not allowed to be used in call distri-
bution.
In order for a subscriber to signal incoming external calls, it needs at
least Exchange line authorisation (business) Only incoming, with
emergency call (Subscriber (scr.) > Properties > Exchange line
settings).
An internal destination can be assigned to an external number. Internal
destinations can be subscribers, groups, voice mail/fax boxes or the
automatic reception functions.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Public switched tel. networks
Call Distribution
543