Table of Contents
Advertisement
Settings – Functions
Automatic Receptions
Using numbers with few digits (two- or three-digit numbers) inevitably
restricts the possible supply of numbers that require more digits. For
example, if the phone number 12 is assigned, the phone numbers 120
to 129 and 1200 to 1299 are no longer available.
The default exchange line access number on the PBX is 0 in the factory
settings. However, this can be changed. Note that changing the
exchange line access number restricts the phone numbering plan.
Name
Freely selectable name. This name is used to identify the automatic
reception within the PBX.
Configure
Opens the configuration of the automatic reception.
New
Adds a new automatic reception. You must then make the settings for this
new automatic reception.
Note: A maximum of ten automatic receptions can be created.
820
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
