Table of Contents
Advertisement
Switch Input
If a device that is suitable as switch input (e. g. a door terminal with door bell
buttons) is connected to the PBX, it can then be used to trigger a door call
or an alarm.
Proceed as follows for configuration:
•
Creating a switch input for an alarm.
– Using the Configuration Manager (page Devices > Alarms)
•
Creating a switch input for a door call.
– Using the Configuration Manager (page Devices > Door terminals)
•
Configuring switch inputs.
– Using the Configuration Manager (on the following pages)
– Devices > Alarms > Switch input >
– Devices > Door terminals > Door terminal calls >
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
)
Switch Input
)
171
Advertisement
Table of Contents
