Exchange Line Transfer; Settings For Exchange Line Transfer - Auerswald COMmander 6000 Advanced Information

Exchange Line Transfer

Topics
– Settings for Exchange Line Transfer (page 817)

Settings for Exchange Line Transfer

Proceed as follows:
• Using the Configuration Manager (Page Functions > Exchange line
transfer)
Exchange line settings for the manually switched exchange line
access
Configure special exchange line settings
The exchange line settings (e.g., exchange line authorisation, call restrictor
(outgoing), call deblocker (outgoing)) for the manually switched exchange
line access will be configured specifically for this purpose.
Use the exchange line settings of the transferring subscriber
The exchange line settings for the manually switched exchange line access
are set depending on the transferring subscriber.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Functions
Exchange Line Transfer
817