Settings Address Books - Auerswald COMmander 6000 Advanced Information

Pbx for internet/isdn telephony
Hide thumbs Also See for COMmander 6000:
Table of Contents

Advertisement

Settings Address Books

Proceed as follows:
Using the Configuration Manager (page User data > Address books >
Settings)
LDAP SERVER
Enable server
The PBX's LDAP server is one of the databases based on this protocol. It
stores the contact data for the PBX's central address books. As the LDAP
server displays the contact data stored in the central address books, it can
also hold up to 2000 contacts like the address books.
The LDAP server is needed to transfer the PBX's contact data to those IP
end devices which support this transfer method (e.g. IP DECT servers or
SIP phones with LDAP support). Any contact data that is input directly on a
phone is not transferred to the central address books.
Auerswald/FONtevo provides LDAP support for the following IP end
devices:
IP phone: COMfortel 1200 IP
IP phones: COMfortel 1400 IP/2600 IP/3600 IP (firmware version 2.4A,
or later)
IP-DECT server: COMfortel WS-400 IP, COMfortel WS-650 IP (only
Auerswald)
IP-DECT handsets: COMfortel M-100/200/210/300/310 (only
Auerswald)
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – User Data
Address Books
947

Advertisement

Table of Contents
loading

This manual is also suitable for:

Commander 6000r

Table of Contents