Table of Contents
Advertisement
Settings – Administration
IP Configuration
Forced logout if no action happens after Minutes (5..60)
The time lapse with the range
5
to
60
for a forced logout defines after how
many minutes a user is automatically logged out of the Configuration
Manager if no action has been taken in the Configuration Manager within a
configured time period. If an action happens after the automatic logout, the
user will see the page for a new login.
ETHERNET CONFIGURATION
Receive the IP address automatically (DHCP client)
The PBX automatically receives its IP address from the DNS server.
Assigning IP address manually
Requirements:
•
Disabled DHCP client
IP address
Enter the IPv4 address in the range 0 to 255 (example: 192.168.0.240).
Apply immediately
The IPv4 address is immediately applied and the PBX is routed to the new
IPv4 address. After the rerouting, you need to log in again.
Apply at restart
The IPv4 address is not applied until the next time the PBX is restarted.
993
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
