Table of Contents
Advertisement
1:1 assignment
If you want to be able to see from the number to which internal subscriber
or internal group the box belongs, you can assign corresponding box
numbers:
•
You can add a digit (prefix) for the box numbers to an up to 3-digit
internal subscriber/group number.
Example: The subscribers 400, 401, 402, 405, 407 are to be assigned
the boxes 7400, 7401, 7402, 7405, 7407.
•
If the internal subscriber/group numbers have 4 digits, the box numbers
can be created by replacing the first digit.
Example: The subscribers 4400, 4401, 4402, 4405, 4407 are to be
assigned the boxes 7400, 7401, 7402, 7405, 7407.
Note:
The number range selected for the box numbers needs to be sufficiently
large: The number range for the examples (from 7400 to 7407) includes
eight numbers, even though only the five corresponding boxes are
created.
If the corresponding number range contains an internal number
(subscriber, group) which is already owner of a group of the type to be
created (voicemail or fax box), no further box will be created for this
number.
If the selected number range for the box numbers already contains a
corresponding box number, the owner of the box remains the same and
a message will be displayed.
If the new owner is not yet an owner of user of another box, the recently
created box will automatically be enabled for the subscriber or group.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Devices
Voice mail/fax boxes
689
Advertisement
Table of Contents
