RESET OF THE PBX (RESTART)
Restart
Requirements:
•
Configured timeframe until restart
The Power LED remains lit in green until all of the calls are terminated or
until the end of the waiting time. If all calls, all connections to/from the web
server and all data services are terminated, the PBX will perform a restart
(even before the defined time has elapsed). If a call (a connection) is active
after the time has elapsed, this call will be interrupted to perform the restart.
The Power LED lights up/flashes in red and orange for up to two minutes.
If the Power LED lights up in green again, the restart is complete and the
PBX is ready for operation.
Note: If the Power LED remains continuously lit in red, an error has
occurred. Please contact your dealer or the manufacturer directly.
minutes
Select a timeframe until restart or power down.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Administration
Firmware Update/Restart
983